Re: [PATCH 0/1] New programmer type: linuxspi

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 0/1] New programmer type: linuxspi

Carl-Daniel Hailfinger
Hi,

may I ask about the current status of this submission?

Joerg Wunsch wrote on Sun, 7 Oct 2018 21:35:56 +0200:

> As Ralf Ramsauer wrote:
>
>> On 9/24/18 10:49 PM, Ralf Ramsauer wrote:
>>> Hi Joerg,
>>> Dear avrdude devs,
>>>
>>> this adds the linuxspi programmer type to avrdude. It allows to flash AVRs via
>>> Linux's spidev interface (/dev/spidev...) together with a GPIO reset pin that
>>> is
>>> attached to a gpiochip (/dev/gpiochip...).
>>>
>>> Initially, this code was written by Kevin (CC'ed) almost half a decade ago.
>>> Back then, he sent it to the list with no responses. Nevertheless, there are
>>> quite a few upvotes on the web interface [1] :-)
 >>>
>>> I picked up his code, rebased it to latest upstream, switched from the
>>> deprecated Linux GPIO sysfs accessors to the 'newer' linux/gpio.h API and
>>> massaged some parts here and there >>> [...]
>
>> *ping*
>
> Well, the better way to submit patches is through the Web interface:
>
> https://savannah.nongnu.org/projects/avrdude

For reference, the ancient submission is here:
https://savannah.nongnu.org/patch/?8228

Regards,
Carl-Daniel

_______________________________________________
avrdude-dev mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 0/1] New programmer type: linuxspi

Ralf Ramsauer-2
Hi Carl,

On 6/11/19 2:26 PM, Carl-Daniel Hailfinger wrote:
> Hi,
>
> may I ask about the current status of this submission?

AFAIR I was not able to use the web interface to create a proper pull
request as required by the submission guidelines. (I'm used to sending
patches via email).

Anyway, it's been a while since the last rebase. Let me check if the
patch still works with latest changes in avrdude, then I'll try to
create a pull request once again.

I'm happy to see that people use this code.

Thanks
  Ralf

>
> Joerg Wunsch wrote on Sun, 7 Oct 2018 21:35:56 +0200:
>> As Ralf Ramsauer wrote:
>>
>>> On 9/24/18 10:49 PM, Ralf Ramsauer wrote:
>>>> Hi Joerg,
>>>> Dear avrdude devs,
>>>>
>>>> this adds the linuxspi programmer type to avrdude. It allows to
>>>> flash AVRs via
>>>> Linux's spidev interface (/dev/spidev...) together with a GPIO reset
>>>> pin that
>>>> is
>>>> attached to a gpiochip (/dev/gpiochip...).
>>>>
>>>> Initially, this code was written by Kevin (CC'ed) almost half a
>>>> decade ago.
>>>> Back then, he sent it to the list with no responses. Nevertheless,
>>>> there are
>>>> quite a few upvotes on the web interface [1] :-)
>>>>
>>>> I picked up his code, rebased it to latest upstream, switched from the
>>>> deprecated Linux GPIO sysfs accessors to the 'newer' linux/gpio.h
>>>> API and
>>>> massaged some parts here and there >>> [...]
>>
>>> *ping*
>>
>> Well, the better way to submit patches is through the Web interface:
>>
>> https://savannah.nongnu.org/projects/avrdude
>
> For reference, the ancient submission is here:
> https://savannah.nongnu.org/patch/?8228
>
> Regards,
> Carl-Daniel

_______________________________________________
avrdude-dev mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
Reply | Threaded
Open this post in threaded view
|

Re: [PATCH 0/1] New programmer type: linuxspi

Ralf Ramsauer-2
In reply to this post by Carl-Daniel Hailfinger
Hi Carl,

Please find the pull request here. I added you on Cc.

https://savannah.nongnu.org/patch/index.php?9816

Cheers
  Ralf


On 6/11/19 2:26 PM, Carl-Daniel Hailfinger wrote:

> Hi,
>
> may I ask about the current status of this submission?
>
> Joerg Wunsch wrote on Sun, 7 Oct 2018 21:35:56 +0200:
>> As Ralf Ramsauer wrote:
>>
>>> On 9/24/18 10:49 PM, Ralf Ramsauer wrote:
>>>> Hi Joerg,
>>>> Dear avrdude devs,
>>>>
>>>> this adds the linuxspi programmer type to avrdude. It allows to
>>>> flash AVRs via
>>>> Linux's spidev interface (/dev/spidev...) together with a GPIO reset
>>>> pin that
>>>> is
>>>> attached to a gpiochip (/dev/gpiochip...).
>>>>
>>>> Initially, this code was written by Kevin (CC'ed) almost half a
>>>> decade ago.
>>>> Back then, he sent it to the list with no responses. Nevertheless,
>>>> there are
>>>> quite a few upvotes on the web interface [1] :-)
>>>>
>>>> I picked up his code, rebased it to latest upstream, switched from the
>>>> deprecated Linux GPIO sysfs accessors to the 'newer' linux/gpio.h
>>>> API and
>>>> massaged some parts here and there >>> [...]
>>
>>> *ping*
>>
>> Well, the better way to submit patches is through the Web interface:
>>
>> https://savannah.nongnu.org/projects/avrdude
>
> For reference, the ancient submission is here:
> https://savannah.nongnu.org/patch/?8228
>
> Regards,
> Carl-Daniel


--
Ralf Ramsauer
GPG: 73F94D11C85252CC

_______________________________________________
avrdude-dev mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev