AVR | Page 2

[bug #35483] ./configure does not accept --target by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #58005] Support for new ATtiny/ATmega devices by Kevin Cuzner-2

by Kevin Cuzner-2

[patch #9543] Add avrxmega3 devices. by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #49082] avrdude 6.3 fails with AT90S8515 by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #58251] only odd bytes are programmed / programming only works in terminal mode. by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #48004] Dead link for linuxgpio in avrdude description by Kevin Cuzner-2

by John Cope

Attempting to modify efuse with avrdude on Atmega32m1 seems to be unsupported by standard means? by Hannes Wallnöfer

by Hannes Wallnöfer

AVR - General

[bug #48776] avrdude attempts to free() an invalid address by Kevin Cuzner-2

by Kevin Cuzner-2

JTAGICE3 on OS X Catalina by Markus Schmelter

by Markus Schmelter

AVR - General

Something I don't understand (loops and interrupts) by BERTRAND Joël

by BERTRAND Joël

Why are switch statement tables in section .rodata which gets copied to RAM with avr-gcc? by Peter C++

by Georg-Johann Lay-2

[patch #9819] Address several leaks in SVN rev 1429 by Kevin Cuzner-2

by Kevin Cuzner-2

[patch #9821] Fix compiler warning avr.c:85:3 about misleading indentation by Kevin Cuzner-2

by Kevin Cuzner-2

[patch #9893] [PATCH] Reader reads ftdi handle after main thread close it by Kevin Cuzner-2

by Kevin Cuzner-2

Re: AVR-GCC-list Digest, Vol 157, Issue 2 by Bob von Knobloch-2

by Bob von Knobloch-2

AVRdude for Atmel Atmega64a by nurul.maisarah

by Daniel Rozsnyó

AVR - General

Where is the error (stdout) by Royce Pereira

by David Kelly

can't reproduce documented overflow behavior of _delay_ms() by Britton Kerin

by Georg-Johann Lay-2

what are the correct high/low maximums for _delay_ms()/_delay_us() by Britton Kerin

by Markus Hitter

[bug #57071] Fix math.h and function names that block 64-bit double by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #53284] realloc() does not respect __freelist size for small allocations by Kevin Cuzner-2

by Kevin Cuzner-2

gdbserver by Shane Santner

by Joerg Wunsch

[bug #57453] [PATCH] fix reference to nonexistant -m option by changing to -U by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #49567] Use meta-info from --print-multi-lib and --print-multi-directory by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57428] [PATCH] document when 'arduino' or 'wiring' should be used, and -D requirement of latter by Kevin Cuzner-2

by Kevin Cuzner-2

support for atmega4809 family? by Britton Kerin

by Georg-Johann Lay-2

[bug #56584] Arduino double reset before programming (TIOCM_DTR clear/set swapped) by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57339] [PATCH] improve safemode -V interaction, additional doc improvements by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57338] if safemode has to change fuses avrdude should exit with non-zero exit code by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57299] util/setbaud.h incompatible with new AVR iom*.h headers by Kevin Cuzner-2

by Kevin Cuzner-2

a couple small proposed fixes for avrdude by Britton Kerin

by Britton Kerin

[bug #57169] MEGA32U2 mEDBG programmer on the ATtiny817 board does not work by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57153] OSX Catalina by Kevin Cuzner-2

by Kevin Cuzner-2

[bug #57154] iom1284p.h: typo of OCR1BL0:OCR1BL7, OCR1BH0:OCR1BH7, OCR3BL0:OCR3BL7 and OCR3AH0:OCR3AH7 by Kevin Cuzner-2

by Kevin Cuzner-2