AT32uc3c1512

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

AT32uc3c1512

sebastian Oldani
Hello friend, i am trying to program a uC in linux, is my first time.
I need a configuration file por this uC (at32uc3c1512) i tried to edit
the avrdude.conf in this way

#------------------------------------------------------------
# AVR32UC3C1512
#------------------------------------------------------------

part
    id          = "uc3c1512";
    desc        = "AT32UC3C1512";
    signature   = 0x00 0x40 0x3F;
    has_jtag    = yes;
    is_avr32    = yes;

    memory "flash"
        paged           = yes;
        page_size       = 512;           # bytes
        readsize        = 512;           # bytes
        num_pages       = 1024;          # could be set dynamicly
        size            = 0x00080000;    # could be set dynamicly
        offset          = 0x80000000;
    ;
;

I search for the signature value, and it has one byte more, but
signature only has three places.

When i try to (for example) erase the uC, i have this error msj:

avrdude: jtagmkII_program_enable(): bad response to enter progmode
command: RSP_ILLEGAL_JTAG_ID
avrdude: jtagmkII_program_enable(): bad response to enter progmode
command: RSP_ILLEGAL_JTAG_ID
avrdude: JTAGEN fuse disabled?
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

Anybody can help me?, i want to program a AT32UC3C1512 from linux with avrdude.

Thank You!!!

_______________________________________________
AVR-chat mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avr-chat
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: AT32uc3c1512

Martin Stejskal

Hi,
I had a lot of problems with 32bit AVR with avrdude, so I ended with dfu-programmer. Update through USB is fast and safe. I know it is not avrdude, but honestly: support for AVR 32 is not best (even from Atmel side) so better this than nothing.

 Regards

  Martin

On 17 Dec 2015 03:18, "sebastian Oldani" <[hidden email]> wrote:
Hello friend, i am trying to program a uC in linux, is my first time.
I need a configuration file por this uC (at32uc3c1512) i tried to edit
the avrdude.conf in this way

#------------------------------------------------------------
# AVR32UC3C1512
#------------------------------------------------------------

part
    id          = "uc3c1512";
    desc        = "AT32UC3C1512";
    signature   = 0x00 0x40 0x3F;
    has_jtag    = yes;
    is_avr32    = yes;

    memory "flash"
        paged           = yes;
        page_size       = 512;           # bytes
        readsize        = 512;           # bytes
        num_pages       = 1024;          # could be set dynamicly
        size            = 0x00080000;    # could be set dynamicly
        offset          = 0x80000000;
    ;
;

I search for the signature value, and it has one byte more, but
signature only has three places.

When i try to (for example) erase the uC, i have this error msj:

avrdude: jtagmkII_program_enable(): bad response to enter progmode
command: RSP_ILLEGAL_JTAG_ID
avrdude: jtagmkII_program_enable(): bad response to enter progmode
command: RSP_ILLEGAL_JTAG_ID
avrdude: JTAGEN fuse disabled?
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.

Anybody can help me?, i want to program a AT32UC3C1512 from linux with avrdude.

Thank You!!!

_______________________________________________
AVR-chat mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avr-chat

_______________________________________________
AVR-chat mailing list
[hidden email]
https://lists.nongnu.org/mailman/listinfo/avr-chat
Loading...