AVR

[bug #58005] Support for new ATtiny/ATmega devices by Balint Cristian

by Balint Cristian

[patch #9543] Add avrxmega3 devices. by Balint Cristian

by Balint Cristian

[bug #49082] avrdude 6.3 fails with AT90S8515 by Balint Cristian

by Balint Cristian

[bug #58251] only odd bytes are programmed / programming only works in terminal mode. by Balint Cristian

by Balint Cristian

[bug #48004] Dead link for linuxgpio in avrdude description by Balint Cristian

by John Cope

Adding support for UPDI-over-UART programmers by Paul "LeoNerd" Evans

by Joerg Wunsch

Attempting to modify efuse with avrdude on Atmega32m1 seems to be unsupported by standard means? by Hannes Wallnöfer

by Hannes Wallnöfer

AVR - General

[bug #48776] avrdude attempts to free() an invalid address by Balint Cristian

by Balint Cristian

JTAGICE3 on OS X Catalina by Markus Schmelter

by Markus Schmelter

AVR - General

Something I don't understand (loops and interrupts) by BERTRAND Joël

by BERTRAND Joël

Why are switch statement tables in section .rodata which gets copied to RAM with avr-gcc? by Peter Sommerlad (C++...

by Georg-Johann Lay-2

[bug #58095] error setting efuse on atmega328pb variant by Balint Cristian

by Balint Cristian

[bug #58078] [PATCH] buspirate: remove compound literals (fixes GCC>=9) by Balint Cristian

by Balint Cristian

[patch #9819] Address several leaks in SVN rev 1429 by Balint Cristian

by Balint Cristian

[bug #55734] USBtiny programming of ATmega328p broken by Patch #9278 by Balint Cristian

by Balint Cristian

[patch #9821] Fix compiler warning avr.c:85:3 about misleading indentation by Balint Cristian

by Balint Cristian

[patch #9893] [PATCH] Reader reads ftdi handle after main thread close it by Balint Cristian

by Balint Cristian

[patch #8228] Added linux spi programmer type based on spidev userspace drivers by Balint Cristian

by Balint Cristian

[patch #9816] Implement new programmer type: linuxspi by Balint Cristian

by Balint Cristian

Re: AVR-GCC-list Digest, Vol 157, Issue 2 by Bob von Knobloch-2

by Bob von Knobloch-2

AVRdude for Atmel Atmega64a by nurul.maisarah

by Daniel Rozsnyó

AVR - General

Where is the error (stdout) by Royce Pereira

by David Kelly

can't reproduce documented overflow behavior of _delay_ms() by Britton Kerin

by Georg-Johann Lay-2

what are the correct high/low maximums for _delay_ms()/_delay_us() by Britton Kerin

by Markus Hitter

[bug #57071] Fix math.h and function names that block 64-bit double by Balint Cristian

by Balint Cristian

[bug #53284] realloc() does not respect __freelist size for small allocations by Balint Cristian

by Balint Cristian

gdbserver by Shane Santner

by Joerg Wunsch

[bug #57453] [PATCH] fix reference to nonexistant -m option by changing to -U by Balint Cristian

by Balint Cristian

[bug #49567] Use meta-info from --print-multi-lib and --print-multi-directory by Balint Cristian

by Balint Cristian

[bug #57428] [PATCH] document when 'arduino' or 'wiring' should be used, and -D requirement of latter by Balint Cristian

by Balint Cristian

[bug #50270] Article "Problems with reordering code" misleading by Balint Cristian

by Balint Cristian

support for atmega4809 family? by Britton Kerin

by Georg-Johann Lay-2

[bug #56584] Arduino double reset before programming (TIOCM_DTR clear/set swapped) by Balint Cristian

by Balint Cristian

[bug #57339] [PATCH] improve safemode -V interaction, additional doc improvements by Balint Cristian

by Balint Cristian